Vedr. Re: Vedr. Re: Vedr. Re: [Olug-list] Feilmelding
Per Inge Oestmoen
pioe at coldsiberia.org
Sat, 04 Jun 2005 14:27:57 +0200
Ole Jakob Sandberg wrote:
> Kjør "dmesg". Varierer litt men stort sett så funker det også som vanlig
> bruker.
Her er resultatet fra en dmesg nå:
siberia@linux:~> dmesg
erial support registered for Generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Non-volatile memory driver v1.2
floppy driver state
-------------------
now=51850 last interrupt=48510 diff=3340 last called handler=c022d110
timeout_message=floppy start
last output bytes:
0 90 48510
1a 90 48510
0 90 48510
3 90 48510
c1 90 48510
10 90 48510
7 80 48510
0 90 48510
8 81 48510
4 80 48510
0 90 48510
e6 80 48870
0 90 48870
0 90 48870
0 90 48870
1 90 48870
2 90 48870
12 90 48870
1b 90 48870
ff 90 48870
last result at 48510
last redo_fd_request at 48490
78
status=50
fdc_busy=1
do_floppy=c0229d20
fd_timer.function=c022a290
cont=c03534f0
current_req=c232ebc0
command_status=-1
floppy0: floppy timeout called
end_request: I/O error, dev fd0, sector 0
eth0: no IPv6 routers present
floppy driver state
-------------------
now=54856 last interrupt=51856 diff=3000 last called handler=c022d110
timeout_message=floppy start
last output bytes:
0 90 51856
13 90 51856
0 90 51856
1a 90 51856
0 90 51856
3 90 51856
c1 90 51856
10 90 51856
7 80 51856
0 90 51856
8 81 51856
e6 80 51856
0 90 51856
0 90 51856
0 90 51856
1 90 51856
2 90 51856
12 90 51856
1b 90 51856
ff 90 51856
last result at 51856
last redo_fd_request at 51856
20 0
status=50
fdc_busy=1
do_floppy=c0229d20
fd_timer.function=c022a290
cont=c03534f0
current_req=c232ebc0
command_status=-1
floppy0: floppy timeout called
end_request: I/O error, dev fd0, sector 0
floppy driver state
-------------------
now=57861 last interrupt=54862 diff=2999 last called handler=c022d110
timeout_message=floppy start
last output bytes:
0 90 54861
13 90 54861
0 90 54861
1a 90 54861
0 90 54861
3 90 54861
c1 90 54862
10 90 54862
7 80 54862
0 90 54862
8 81 54862
e6 80 54862
0 90 54862
0 90 54862
0 90 54862
1 90 54862
2 90 54862
12 90 54862
1b 90 54862
ff 90 54862
last result at 54862
last redo_fd_request at 54861
20 0
status=50
fdc_busy=1
do_floppy=c0229d20
fd_timer.function=c022a290
cont=c03534f0
current_req=c232ebc0
command_status=-1
floppy0: floppy timeout called
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
floppy driver state
-------------------
now=60866 last interrupt=57867 diff=2999 last called handler=c022d110
timeout_message=floppy start
last output bytes:
0 90 57866
13 90 57866
0 90 57866
1a 90 57866
0 90 57866
3 90 57866
c1 90 57866
10 90 57866
7 80 57866
0 90 57866
8 81 57867
e6 80 57867
0 90 57867
0 90 57867
0 90 57867
1 90 57867
2 90 57867
12 90 57867
1b 90 57867
ff 90 57867
last result at 57867
last redo_fd_request at 57866
20 0
status=50
fdc_busy=1
do_floppy=c0229d20
fd_timer.function=c022a290
cont=c03534f0
current_req=c232ebc0
command_status=-1
floppy0: floppy timeout called
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
hdc: ATAPI DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
sr1: scsi-1 drive
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0
st: Version 20040318, fixed bufsize 32768, s/g segs 256
dc395x: sg_update_list: sg_to_virt failed
dc395x: sg_update_list: sg_to_virt failed
Attached scsi generic sg0 at scsi0, channel 0, id 3, lun 0, type 5
Attached scsi generic sg1 at scsi0, channel 0, id 4, lun 0, type 5
dc395x: sg_update_list: sg_to_virt failed
BIOS EDD facility v0.13 2004-Mar-09, 2 devices found
dc395x: sg_update_list: sg_to_virt failed
dc395x: Interrupt from DMA engine: 0x63!
dc395x: Ignoring DMA error (probably a bad thing) ...
dc395x: Interrupt from DMA engine: 0x23!
dc395x: Ignoring DMA error (probably a bad thing) ...
dc395x: Interrupt from DMA engine: 0x63!
dc395x: Ignoring DMA error (probably a bad thing) ...
dc395x: sg_update_list: sg_to_virt failed
usb 5-1: new high speed USB device using address 2
usb 5-1: Product: USB TO IDE
Initializing USB Mass Storage driver...
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: Generic Model: STORAGE DEVICE Rev: 1.01
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 4029984 512-byte hdwr sectors (2063 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 0
USB Mass Storage device found at 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
dc395x: Interrupt from DMA engine: 0x23!
dc395x: Ignoring DMA error (probably a bad thing) ...
dc395x: Interrupt from DMA engine: 0x63!
dc395x: Ignoring DMA error (probably a bad thing) ...
usb 5-1: USB disconnect, address 2
dc395x: Interrupt from DMA engine: 0x23!
dc395x: Ignoring DMA error (probably a bad thing) ...
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x0 on
isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
usb 5-1: new high speed USB device using address 3
usb 5-1: Product: Cruzer Micro
usb 5-1: Manufacturer: SanDisk Corporation
usb 5-1: SerialNumber: SNDKAA78A42D00108504
scsi2 : SCSI emulation for USB Mass Storage devices
Vendor: SanDisk Model: Cruzer Micro Rev: 0.2
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 1000944 512-byte hdwr sectors (512 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0, type 0
USB Mass Storage device found at 3
usb 5-1: USB disconnect, address 3
usb 5-1: new high speed USB device using address 4
usb 5-1: Product: DataTraveler II+
usb 5-1: Manufacturer: Kingston
usb 5-1: SerialNumber: 5B4A18211C38
scsi3 : SCSI emulation for USB Mass Storage devices
Vendor: Kingston Model: DataTraveler II+ Rev: 1.13
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 1006592 512-byte hdwr sectors (515 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi3, channel 0, id 0, lun 0
Attached scsi generic sg2 at scsi3, channel 0, id 0, lun 0, type 0
USB Mass Storage device found at 4
usb 5-1: USB disconnect, address 4
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
usb 5-1: new high speed USB device using address 5
usb 5-1: Product: DataTraveler II+
usb 5-1: Manufacturer: Kingston
usb 5-1: SerialNumber: 5B4A18211C38
scsi4 : SCSI emulation for USB Mass Storage devices
Vendor: Kingston Model: DataTraveler II+ Rev: 1.13
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 1006592 512-byte hdwr sectors (515 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi4, channel 0, id 0, lun 0
Attached scsi generic sg2 at scsi4, channel 0, id 0, lun 0, type 0
USB Mass Storage device found at 5
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
dc395x: Interrupt from DMA engine: 0x23!
dc395x: Ignoring DMA error (probably a bad thing) ...
dc395x: Interrupt from DMA engine: 0x63!
dc395x: Ignoring DMA error (probably a bad thing) ...
dc395x: Interrupt from DMA engine: 0x23!
dc395x: Ignoring DMA error (probably a bad thing) ...
usb 5-1: USB disconnect, address 5
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
usb 5-1: new high speed USB device using address 6
usb 5-1: Product: USB TO IDE
scsi5 : SCSI emulation for USB Mass Storage devices
scsi scan: 37 byte inquiry failed with code 134217730. Consider
BLIST_INQUIRY_36 for this device
Vendor: Generic Model: STORAGE DEVICE Rev: 1.01
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi5, channel 0, id 0, lun 0
Attached scsi generic sg2 at scsi5, channel 0, id 0, lun 0, type 0
USB Mass Storage device found at 6
SCSI device sda: 4029984 512-byte hdwr sectors (2063 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
SCSI device sda: 4029984 512-byte hdwr sectors (2063 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda: sda1
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
subfs: unsuccessful attempt to mount media (256)
siberia@linux:~>
----